Early Access Video: The $30 Dollar Vise
🕑 Added 2019-07-06 11:38:43 +0000 UTCFriends:
I'm especially proud of this one. This vise can be built with handtools in about a day. It costs around $30 and it works really well. After a lot of searching and experimenting, I've finally come up with a vise design that I can stand behind.
If you've built a few of the Woodwork for Humans projects, then you can do this. You'll need a few simple metal-working tools like a hacksaw and some drill bits, but the rest of the project is straight-forward sawing, boring, and planing.
The final vise is based off the English pattern Face Vice, a long-standing design that probably led to the modern cast-iron vise. It's a simple and solid way of holding work and this version really gets the job done.
Thanks for supporting this ambitious build!
Happy Saturday!
--Rex
Comments
Gringo pd
Beginner here. I have the screw jack on order. I HOPE to fix it to Workpro steel-framed workbench but using 4” x 2” softwood top — 4” thick. Any ideas? ALSO, has anybody tried a steel rod with linear bearings instead of a dowel for guide arm? Some say that does not work. I am grateful. Patrick Dowling
Matthew Leigh
Here's a video discussing why they're better: https://www.youtube.com/watch?v=lp6CyTsa8s4
Rex Krueger
Never even occurred to me to try the zero flute on wood. Thanks!
Rex Krueger
Crap! I knew I forgot something! Stand by for emergency post!
Jim Williams
I think that part goes active tomorrow when the video airs for the "normal" folk.
Howard Tuckey
How do we patrons get the free plans? I went to the store, just as I did for your Lathe book, and it wants me to pay for them - I did for the book, but was that supposed to be free as well for patrons?
Eduardo
I konw, my friend! Belive me! I know! lol
Matthew Leigh
Zero flute countersinks are much nicer and really cheap on ebay. Work well for metal as well as wood
Rex Krueger
Thanks! Getting the timing right was very difficult. I have a video clip of me saying "son-of-a-bitch" like 20 times.
Rex Krueger
I'm going to tell my wife someone called me "courteous and professional". She'll die laughing.
David
Another great video Rex. I especially like the end bit. People like what they will regardless of what we’re talking about and a lot of immature adults can’t get past their own hang ups. You deal with that in a courteous, professional manner. Keep it up.
Robert Quinn
Dude! I totally dig that edit at 1:17. You knocked it out of the park with this one as usual! Keep up the excellent work my man!
Rex Krueger
Oh, we lost a little footage there, so my editor spliced in some later footage and slowed it down to make it look different. We needed a creative solution. Good eye though! I appreciate you always looking out for quality of my work!
Rex Krueger
Thank you!
LiraNuna
Great video! Around 3:37 I think the audio is out of sync.
Frans van Ballegooijen
I just love it...
Rex Krueger
I'm glad to be making content that you find valuable.
Rex Krueger
I did see that one! Pask is the man!
WhatMeWorry
Great idea to use that jack. Videos like this are why I support your work.
Brian King
I've seen those scaffolding levelers used on a few vises. I think Pask Makes even used one as a tap to build a wooden thread die. Really cool concept and video if you haven't seen it.
Rex Krueger
I'd love to see it when it's done!
Rex Krueger
John's build was totally an inspiration!
Jessica McIntosh
That's pretty clever. John Heiz made a bench top vice with the same jack screw. https://ibuildit.ca/projects/wooden-vise/
Scott Pratt
Going to use some of the tips you mentioned to tune the vice, on the moxon vice I'm building on my work bench.
Rex Krueger
Yeah! Making really round parts without a lathe is WAY too hard with hand tools.
Rex Krueger
Better leave yourself a full day (maybe a little more). Nothing here is very hard, but it does take longer than you'd think. Please post it if you build it.
Rex Krueger
Thank you!
Eduardo
It was a good choice to keep the parts as octagons.
Kostas Karanatsis
dlc for the workbench! yey
Alex Southwell
Looks awesome. I can't wait til i get a weekend free to get on top of this and some other builds.
Scott Pratt
The vice looks and works great. Great video.