Early Access Video: Make your own low-angle jack
🕑 Added 2019-10-05 14:53:44 +0000 UTCFriends:
You saw the prototype; now meet the real deal. After a hectic week of sawing, filing, chiseling, and editing, I have it. And it's pretty great. The plane works and does most of the things a low-angle jack is supposed to do.
Should you make one in your shop? I'll let you be the judge.
A quick note: I'll be spending next week in Hershey, Pennsylvania attending the world's largest antique car flea market. Why? Because car people often have tools to sell. Cheaply.
I don't get back until Saturday, so next week's video will be late. I beg your patience. I'll be taking a camera with me and I hope to do a deep-dive into my flea market strategies (and I've got a few). The earliest that video will come out will be Monday. If you're not already following me on Instagram (@rexkrueger), you can catch me there for photos of the event and hot dispatches on my great tool finds.
In the mean-time, the weather here has turned crisp and breezy. My family and I gathered around the fire for the first time this season. In my travels, I'll be thinking of my Patrons and how I can bring you more great stuff. I wish the very best for you and your families.
Thanks as always!
--Rex
Comments
Jason Bailey
That’s awesome, Rex! Yeah, the limiting it was just a fun little joke. I haven’t gotten into the hand tool rabbit hole to where I’d be in need of such a thing. While I’m not still at the course woodworking stage yet, I’m closer to that than the fine woodworking level. I’d say I’m 80-120 grit. ;)
Rex Krueger
That's a total possibility! (Although it would be open to everyone!.)
Jason Bailey
Haha---touche, number 1--you win...but doesn't your name appear in a plane brand, too? I guess they leave off the "gh".
Matthew Leigh
Anyone named after a plane is ineligible...
Jason Bailey
I'd watch it, but that's not saying to much because I'd watch any of your videos....that's kinda why I'm a Patreon supporter. But if you buy it and don't like it, you could always get rid of it with a giveaway...one that's only open to your first two Patreon supporters. ;)
Mark L
Boy do I need to learn to proofread before hitting the return key. That first sentence is a doozy.
Mark L
A great looking plane and I loved watching the build, but you pretty well captured my current thoughts when you said "given a choice, I'd reach for my Stanley...." That being said, should you choose to do a comparison video, I will watch and be ready to be convinced should the Stanley low angle prove to be a jewel.
Lawrence Jones Jr
Perhaps not the Stanley. I was thinking Veritas myself or perhaps Wood River.
Rex Krueger
That's true. I think the Stanley would make a more reasonable comparison.
Ramin Chalili
Awesome! Can't wait to watch that one too!
James Boatright
Rex, A1base has a Veritas. Comparing against an EXPENSICE plane....
Rex Krueger
Of course you're right about the shipping, but if we're going to shell out $30 just shipping it around, I might as well just buy the Stanley. I'm thinking it over.
Rex Krueger
I've been thinking almost exactly the same thing.
Rex Krueger
You're very kind. To be fair, it was just the bandsaw, sander and drill-press. You could do everything by hand, but it would take a long time. My wife does think mine is pretty.
Rex Krueger
I'm really glad you liked it so much! I will be doing a router, but I'll be using a chisel as the blade, since most people have a chisel handy. You can use an allen key, but that takes a grinder, which many people don't have.
Rex Krueger
I'm really thinking about just buying one. Might be good to have.
James Boatright
A1base... a medium us postal flat rate box is $14.35. For up to 70 pounds, and is 14 x 12 x 3 . If it fits thats pretty cheap. William, i guess youre out ay?
Anderson Young
Great video, Rex. I would like to see the comparison with and assessment of the Stanley low angle jack. Like you, I've been low-angle curious (and skeptical). If I've been missing out, I might be willing to spring for the Stanley's price point.
Adrian Abshire
Another great video Rex! I learn something every time I watch you! For one thing it takes a LOT of power tools to make a hand plane! Lol I think my wife would divorce me if I spent that much time building a tool even if it IS a work of art!
Nic Beurskens
Oooh I like this one! If nothing else I feel like it's a crazy neglected tool on YT. Paul Sellers does have a video making a cheap wooden one with a chisel. I'd like to see how you would approach it Rex. Or at the very least your take on how useful you find them, similar to your block plane video. I don't have a ton of money, but I can save for a quality tool. My main interest in the WW4H series is getting a better idea of which tools I really have a need for. I love my router plane. I run a no5 and a no4 (though less frequently). My shoulder planes come in handy but are less than essential. Luckily those were gifts and I didn't have to splash out the cash for them. Doing this build, then making a judgement on whether a tool is essential is great content for me.
Ramin Chalili
I love the result, Rex! Congrats! The channel gets better and better! I wanted a nice router plane but I can't afford one. So, I have purchased a veritas cutter and I've been thinking how I can try and make one. So, here's an idea... probably make a video on making a router!
Jared Leff
Do it!!
William Allen
I would be happy to loan it, but I’m in Canada and he’s in the US. By the time I ship it to him and back it would be over the price of the plane lol.
William Allen
I have a hand drill press, it is awesome, picked it up for $65cdn. We use to have a hand Motiser on the farm, but it disappeared at some point. The ones I’ve found so far have been far more $ than a brand new electric chain mortiser. I will keep looking. If I don’t find one I’ll have to buy a new one. The Makita one is only $365cdn. I much prefer the hand cranked one because you have so much better control.
A1BASE
I’ve got a Shop Fox pillar drill that actually doubles as a spindle sander. You can attach another belt into the gearing and the quill automatically moves up and down as it turns, and it’s built to take the load. It’s what I recommend for new shops that don’t want separate big bits of kit. A dedicated spindle sander would be dead useful though. I wish I had the room!
Rex Krueger
A good tip, for sure. I only do it now and then and this press is stout. I do want to pick up a spindle-sander at some point.
Rex Krueger
I have never seen one in the flesh, but last year, I did see one of these portable, hand-cranked drill presses meant for timber-framing. It was cool...and expensive.
Rex Krueger
I love wooden planes. So under-rated these days!
Rex Krueger
It wouldn't violate my free stuff policy at all, but it's also a big pain to do all the shipping. By the time we shipped it back and forth, it would be a significant fraction of just buying the damn thing. I do very much appreciate the suggestion, though!
Lawrence Jones Jr
For my 2 bits, I'd take the low angle loaner Rex for the comparison so as to not take the free stuff and I'd really like to see it.
Rex Krueger
Thanks for saying so! I happen to be quite proud of this one myself. I appreciate the vote of confidence.
Gary Meechan
Best video I have seen you do, yes get another for comparison. Thank you for your great tutorials. Falkirk, Scotland.
A1BASE
I think Rex has a homemade jointing plane, and I’ve got a high end one I’d be happy to loan out... there could be an entire series here. High quality files are another thing I would always pick over cheap and cheerful and could loan for a video.
James Boatright
William, could you LOAN Rex your low angle plane so he could shoot the comparison and ship it back to you? I don't see how that could violate his 'I don't take free stuff ' ethic.
William Allen
You should definitely do a side by side. On the other hand. I have a low angle smoothing plane. It works great for some things, and not at all for others. End grain is great, softwoods are great, mixed grain hardwoods are absolutely horrible, just OMG bad. For those, I've taken to using a high angle smoothing plane (it's wooden)
William Allen
Ya, I don't use a plane hammer anymore. I use to, but not anymore. I just tap the plane on the bench. Actually gives finer adjustments, so I'm happier with that way
William Allen
While you are at the boot sale, keep your eye open for a hand cranked chain mortiser. :P
A1BASE
Just a heads up - be super gentle using a pillar drill as a spindle sander. Most aren’t made to take lateral load, even a slight one. I’ve broken a cheap one by doing this.
Howard Tuckey
Excellent video! Mayhap you can do an addendum, adapting the construction techniques to the building of a conventional jack plane! Or just modify the plans set, adding the angles, etc, to do that.
Kris Towson
Great idea for the build! I wish I had a plane to give you a loan for testing, but I do hope someone out there can help make that happen.
The Poor Man
Lane House said exactly what I was thinking. I would enjoy seeing a comparison, but at the same time I see it like this- if I wouldn't spend $100 or so for the cheaper option I'm not going to ask someone else to do it. I did enjoy seeing how you solved the mouth issue, has been wondering what you were going to do. As far as direction goes I think what you've been doing works great I mean we're all here right? I do know that lots of people enjoy seeing that woodworking can be done with relative frugality and you demonstrate that very well. There are tons of woodworkers on YouTube trying to sell people on the whole "buy this expensive tool otherwise your not going to be able to do good work" line and that's a load of BS, my proof is the three tool mallet, $30 bench and the whole woodworking for humans series. First video of yours I watched was the three tool mallet, watched it and five min later went out into my shop and did it took me 2 hours been a fan since.
Shanni Marmen
Maybe you can find a cheap one at that flea market
A1BASE
I actually have a Veritas low angle jointer and I love it. I never saw the need for another version of it though. Lie Nielsen says this of low angle jacks “The trick to making the most out of a low angle plane is to keep a number of different blades. For example: 25° for end grain work, 35° for smoothing, 40° or more for tackling wavy grain with less tear out, a Toothed Blade for aggressive removal of material with less effort, and a 90° Scraper Blade.”... who has the time for that nonsense?
Rex Krueger
You're probably right. Thanks for looking out for me!
Rex Krueger
I'm sure my wife agrees with you!
Lane House
I feel like it would be an interesting video, but not worrh the financial investment. Perhaps someone can loan one to you for a video?
Jim Williams
Great video Rex! Save your money for important things, like anniversary present and the like.