Maximum Custom Games patreon

Assetto Corsa Vision Reality 1.3.5 and Reshade preset

🕑 Added 2024-07-05 20:45:32 +0000 UTC

Comments

MCG

Hi, try first with CSP and Pure with a default ppfilter or the Pure one. If it works then my ppfilter will work but I advise you without Reshade. The version 1.3.5 is at the very bottom of the page

MADRYN VIRTUAL RACER

Hello good afternoon, I have an RTX 2060, can I use these filters?

MCG

with your configuration if playing in 1080p normally it should work. If you've already tried the game and it runs fine, then AC Vision Reality without Reshade should run fine as well since it's just a filter. AC Vision Reality is compatible with all versions of Pure up to 2.36. I have not yet tested with version 2.38 nor with CSP 0.2.6p1 but I think it works

Alexandre_4K

My settings are considered modest, right? Rtx 3070 + i9 10900k Another question would be, does it work with the latest version of Peter's pure too, or does it have to be with everything in the same version you used?

Atomic GamingZ

ah got it thanks

MCG

his entire package is on his Discord link

MCG

you need to copy the RTGI files to the "reshade-shaders" folder and you will have these check effects if you load my preset "Vision Reality 1.3.5 Reshade preset.ini" with Reshade. You will have the same shaders activated as on the screen of my Patreon post

Atomic GamingZ

cannot find immerse pro?

Atomic GamingZ

how do you install rtgi after you buy from their patreon?

MCG

Hi, Does this only happen with the GTR R36? Try this: Open Pure Config and go to the "Light" tab then reduce "CSP_lights_emissive"

Hanss Barros

Good afternoon Máximo, I have a question, I have done well with the latest vision reality 1.3.5 configurations, only now I have recently noticed a detail, and that is that the rear lights of the Nissan GTR R36 Concept car look a little a bit blurry like Yes. It's poor quality. , and when I saw your video about installing Vision Reality 1.1, you use the same car but your taillights look good, so I don't know how I could make them look better..., it should be noted that I don't have the RGTI, please attach my images on the OVERTAKE page, my username is Z9CS, regards.

Iulian Iulian

i've send you an message, if you want to look there, thanks

MCG

for the Nissan R36 try this link https://modsfire.com/o2dUinQed5Im9H2

MCG

I have a feeling it's a car related error, does this happen with other cars? Otherwise try reinstalling CSP. In any case it's not related to Reshade. Reshade is optional you don't need to install it. There is a Reshade file in my .zip but if you don't have Reshade installed, it has no impact in game, you can even delete it

Hanss Barros

Or maybe it's because I skipped the step of installing reshade at the beginning? Although this version of AC vision reality 1.3.5 already includes reshade if I'm not mistaken, or I don't know what I could be doing wrong...

Hanss Barros

Hello Maximum, I hope you can see my case, anyway I will give you in text mode the entire error message that I get when I press the start key on my pc: AssettoCorsa, Kunos Simulazioni Renderer: KS DX11 Renderer COMMAND CONSOLE INIReader: content/cars/adde_nissan_r36/data/lods.ini > KEY_NOT_FOUND: [COCKPIT_HR] DISTANCE_SWITCH [ERROR] DIGITAL ITEM PARENT:DISPLAY_GEAR NOT FOUND [ERROR] DIGITAL ITEM PARENT:MFD_SPEED NOT FOUND [ERROR] DIGITAL ITEM PARENT:MFD_CLOCK NOT FOUND [ERROR] DIGITAL ITEM PARENT:DISPLAY_GEAR NOT FOUND [ERROR] DIGITAL ITEM PARENT:DISPLAY_GEAR NOT FOUND [ERROR] DIGITAL ITEM PARENT:DISPLAY_GEAR NOT FOUND [ERROR] DIGITAL ITEM PARENT:DISPLAY_GEAR NOT FOUND Python [ERROR] File apps/python/acnotify/acnotify.py not found in folder

Hanss Barros

Ok friend, thank you, the image quality has improved a little, but when I press the home key to continue with the other settings I get an error message. I don't know if it would be possible for you to give me an email or for me to give you my email by that means, I'd better send you the screenshot of the error...

MCG

hi, I'm not sure I understood your message. Can you write it in English? But according to the translation with Google, try to import my settings by clicking on "Import" in the "Pure Config" menu then select the file "AC Vision Reality 1.3.5.ini" which is located in "X:\ SteamLibrary\steamapps\common\assettocorsa\extension\config-ext\Pure" Once it's loaded go to the "PP" tab then click on "Save Script" then normally it will be good

MCG

Hi, you should ignore these 2 errors. They are not necessary

Fat Rat

I've tried installing this but reshade gives 2 errors and it doesn't work properly

Hanss Barros

Buenas noches , tengo una duda ojalá me puedan ayudar,acabo de ya casi terminar las modificaciones, pero en los parámetros PP no me figura AC vision reality 1.3.5 , en mi caso me sale none, no me muestra el AC vision reality... y en filtros antes de iniciar la carrera si puse en el modo filtros el AC vision reality, entonces nose a que se deba eso, cabe recalcar que tengo descargado la ultima actualizacion de PURE que fue publicado el 2 setiembre y tengo el CSP 0.2.4...

MCG

hi, I have LSC 1.0 version here https://www.youtube.com/watch?v=4BB1QrkQamI

Zib

Will you do a LCS version ?

MCG

does this happen with my ppfilter or when you apply my CSP settings?

Ret1cle

when using this all of my game became weirdly pixelated what happened is it to do with some of the textures?

MCG

reinstall Reshade and when you arrive at the "select effects to install" menu click on "uncheck all" at the top right and do "next" then "finish". Once this is done, copy and paste my "reshade-shaders" folder into the Assetto Corsa folder at the root and normally the effects should load when launching the game. If you see a message with it in red, ignore this message because we do not use these missing shaders. Just check that you have the same effects which are checked as in the screenshot

vato

when i try to load vision reality thingy on reshade it says "No effect files (.fx) found in the configured effect search paths:... assettocorsa please verify they are set up correctly in the settings and hit 'reload'! and my game looks very not good, idk what im even doing anymore

MCG

in game open "Pure Config" and reduce the value of "csp.lights.emissive" in the "light" tab

jimweslyhill

Hello. I have a question. How to remove overexposures on different light sources? Screenshot attached https://drive.google.com/file/d/1T2-0Y2TN7g-B4VPGfZR6F2YFZspngtUd/view?usp=drive_link and also, I have overexposure of various white objects, such as cars, rims, license plates. in open locations it is not noticeable, but in tunnels and shadow areas it is very noticeable

MCG

Thanks for your feedback:) if the image seems pixelated check in: open Content Manager -> Settings -> CSP (Custom Shaders Patch) -> Graphics Adjustments tab if AMD FidelityFX Super Resolution is checked if yes, please uncheck it. For trees that are in 2D you need to download mods to have them in 3D. Type Assetto Corsa trees fx on Google, you will find it for the map you want

MCG

Did you install CSP and Pure before installing my ppfilter? I made a video of the installation of ppfilter and Reshade here but you need to have CSP and Pure installed first. https://youtu.be/hrTTaYQtKUM

MCG

If you have a message in red, don't take it into account as long as you have the same effects which are checked as on the screen I posted. This message indicates that shaders need to be updated. You don't need it because these shaders are not necessary. Concerning the message in a gray box, you must modify the key which opens the Reshade menu because this same key which as to open the Assetto Corsa "consol" menu. You just need to assign another key. Go to Reshade settings then change the "Home" key to another. for the blur effect, also assign a key that allows you to deactivate and activate the effects of Reshade in game, this will allow you to know if it is because of Reshade but the most important thing is that you should have the same check shaders as on my screen. Be sure you loaded my preset with Reshade

Horst koston

perfect, will just reinstall it cleanly then. love your work

MCG

thank you for the info. If the shaders are loaded twice, please uncheck the duplicate ones. To avoid this problem you must click on "Uncheck All" at the top right when the "select effects to install" menu appears when you install Reshade. You don't need to install them because the effects I use for Reshade are in the .zip/.rar folder

Horst koston

i fixed it. the problem was my anisoitropic filtering settings in nvidia control panel. is it normal that some of the reshade fx are loaded / listyed twice?

MCG

hi, try unchecking the shaders one by one by opening the Reshade menu. Otherwise if you have imported my CSP settings open Content Manager -> CSP -> Graphics adjustments and uncheck "AMD FidelityFX Super resolution

Horst koston

hey there, i think my reshade settings are not getting imported properly. as soon as i activate reshade, the sharpness of the image is off. its almost looking like cell shading on the car models.

MCG

hi, yes, Vision Reality 1.3.5 contains my presets for Pure and is compatible with Pure 0.271

L.

hi is there any pp config presets for pure 0.271?

MCG

Hi, check if your exposure is at 100% if yes, try lowering the "brightness" in the "PP" tab of "Pure config" and do you have this problem with the other ppfilters?

Ademar Hermida

Good evening, this 1.3.5 filter doesn't work on my AC, I've tried everything, it's very bright and the CSP reshader doesn't recognize it, so it's difficult to get to these graphs.